Exposure Integrated Amplifier 2510, Black

Features

• 75W RMS per channel into 8 Ohms
• Five line inputs
• MM phono stage fitted as standard
• Separate pre-amp output
• High quality capacitors used in the signal path
• Uniquely tuned short signal and power supply path PCB
• Cascode circuitry utilised for improved power supply immunity
• Fast bipolar transistor output stage for dynamic and vivid performance
• All aluminium casework and extruded front panel to control resonance and stray electromagnetic fields

Specifications

Speaker Output

Power Output (1kHz) : 75W per channel into 8 Ohms
Total Harmonic Distortion : <0.015% at 1kHz, rated power
Frequency Response : 20Hz to 20kHz +/-0.5dB
Signal to Noise Ratio : ref 1kHz & 75W output : >100dB, A weighted
Channel Separation : >60dB @ 1kHz LINE input open (shorted >80dB)
>40dB @ 20kHz LINE input open (shorted >60dB)

Pre-Amplifier

Pre-Amplifier Output : +12dB ref LINE input
Frequency Response : 20Hz to 20kHz +/-0.5dB
Signal to Noise Ratio : ref 1kHz & 1V output : >100dB, A weighted
Channel Separation @ 20kHz : >60dB input shorted
>40dB input open AUX2 input

Inputs

AV Input Fixed Level : 850mV @ 1kHz, 10K Ohms, S/N >100dB
AUX 1 Phono Input MM : 2.5mV @ 1kHz, 47K Ohms, S/N >72dB
LINE Inputs (Except AV) : 350mV @ 1kHz, >14K Ohms, S/N >100dB

General

Mains Supply : 110/120V or 220/240V @ 50/60Hz (factory set)
Fuse : T5AL for 110/120V units
T2.5AL for 220/240V units
Power Consumption : <200W
Dimensions (HxWxD) : 90mm x 440mm x 300mm (inc knob)
Net Weight : 6kg
Gross Weight : 8kg

Package Contents: Exposure Integrated Amplifier 2510, Black; Power cable; Manual.