Denon Stereo Amplifier PMA-1700NE, Silver

Discover an amplifier that delivers sound you can feel

Wide bandwidth captures everything from deep bass to detailed highs.

Powerful sound from an integrated amplifier

Engineered with premium Denon technologies, this amplifier drives two channels at 140W.

Faithful audio reproduction

Advanced AL32 Processing Plus delivers the richly detailed sound the artist intended.

Build integrity with selected components

With more than 110 years of audio excellence, Denon products are built to last.

Add power to your Hi-Fi experience

Hight-power 140W integrated amplifier
Drive your loudspeakers with 140 Watts of power- per-channel into 4 Ohms. This integrated amplifier offers compatibility with the widest range of 6 speaker types and impedances for operational stability.

Specifications

General

Unit (W x D x H): 434 x 410 x 135mm, 17.1 x 16.1 x 5.3in
Cabinet Size (W x D x H): 434 x 374 x 135mm, 17.1 x 14.7 x 5.3in
Net weight: 17.6kg, 38.8lb
Packaging Dimensions (W x D x H): 548 x 520 x 249mm, 21.6 x 20.5 x 9.8in
Packaging gross weight: 20.4kg, 45lb
Carton Color: 2 Color
Cushion / Packing: 4 Separate / Sheet
Panel Color: SP / BK
Front (Center) Panel: Aluminum
Side cover: SECC with 4 straight emboss
Side screw: SP: Nickel / BK: Black
Rear Panel: SECC t1.0mm
Chassis Material: SECC t1.2mm
Bottom Layer: Single
Volume Knob: Aluminum
Input Selector: Aluminum
Bass/Treble/Balance/ Phono Sel knobs: Aluminum
Power button: Aluminum
Other knob/button (LOUDNESS, SOURCE DIRECT etc): Mold (Source Direct,Analog Mode,MM/MC): Foot ABS resin with rigid rib w/Hot stamp (H : 20mm)
Heatsink for Power Amplifier: Extruded Aluminum

Specifications

Rated Output Power: 70W + 70W, (8ohm,20Hz-20kHz,THD0.07%), 140W + 140W, (4ohm, 1kHz, THD0.7%)
Speaker Impedance: A or B : 4 ~ 16ohm, A + B : 8 ~ 16ohm
Frequency Response: 5Hz – 100kHz (0~ -3dB)
Total Harmonic Distortion: 0.01 % (Rated output: –3 dB), 8 ohm/ohms, 1 kHz
Dumping Factor: 100 and over
Input Sensitivity: Phono input: MM: 2.5 mV / 47 kohm, MC: 200
RIAA Deviation: 20 Hz – 20 kHz ±0.5 dB (MM/MC)
Phono Maximum Input: MM : 130mV / 1kHz, MC : 10mV / 1kHz
Input Sensitivity: CD/LINE/RECORDER: 125 mV / 19 kohm
Input Sensitivity: Power Amp input: 0.85V / 47kohm (EXT. PRE)
Signal to Noise Ratio: PHONO (MM): (89dB), PHONO (MC): (74dB), CD: (107dB)
Tone Control: BASS : 100Hz ±8dB, TREBLE : 10kHz ±8dB
Power Consumption: 295W
at Standby: 0.2W TV autoplay off, 0.4W TV autoplay on

Audio Feature

Power Amplifier Circuit: New UHC-MOS, Single Push Pull (7)
Power Trans: Dual El Core
Pre Amplifier Circuit: Variable Gain Preamplifier, (OP AMP)
Volume: Electric, (MUSES 72323)
Bass / Treble / Mid / Balance Control: Yes / Yes / No / Yes
Type of Tone Control: Electric, Controlled by Potentiometer
Headphone Circuit: Use Poweramplifier
Source Direct: Yes
Analog Amp Mode: Yes (button on front panel)
Other: 70
DAC Circuit: PCM1795
Digital Filter: Fixed
Digital Processing: Advanced AL32 Processing Plus
DAC Master Clock Design (Doesn’t Support Network Playback): Yes
Asyncronous mode (for USB-B input): yes
Isolator (for USB-B input): Yes, Full Isolation

Connectivity

Phono Input: Yes (MM / MC) *default=MM
Analog Input (include Phono) / REC Out (RCA): 4/1 (PHONO/ CD/ AUX/ RECORDER)
Optical input / output (Maximum Support): 2 / 0 (192kHz/24bit)
Coaxial input / output (Maximum Support): 1 / 0 (192kHz/24bit)
Ext. Pre Input (Power Amp Direct): Yes(Ext.Pre)
2 sets of Speaker Output: Yes (Bi-wiring)
Speaker Terminal: Gold Plated
Headphone Output: 1, (Turn off the speaker when inserting headphone)
Remote Control Bus Terminal: Yes (mini)
AC Inlet: Yes
Wi-Fi: No
HEOS: No
USB B (USB DAC): 1 (Rear)
Module or Main Device: New XMOS, (XU210-256-TQ128 )
PCM Sample Rate: ~384kHz/32bit
DSD Audio Streaming (DoP): ~11.2MHz
Roon Certificaton: Yes(Roon Tested), TBD

Package Contents: Denon Stereo Amplifier PMA-1700NE, Silver, Quick Start Guide, Power cord, Remote control unit (RC-1249), 2× R03/AAA batteries.